Explorez Menuiserie, Atelier et plus encore !

Découvrir des thèmes similaires

2x4 Shelving the best way to fit 2x4 at corner, screw, wood, shelf, end, no glue

2x4 Shelving the best way to fit 2x4 at corner, screw, wood, shelf, end, no glue

3 way joints - 6 ways to make corners

3 way joints - 6 ways to make corners

Cranté cèdre bois facilement pile avec pas d’outils pour faire un cadre de lit solide.

Cadre de lit bois cranté

Cranté cèdre bois facilement pile avec pas d’outils pour faire un cadre de lit solide.

DIY Workbench. I like the bottom shelf only being half-depth, so you can stand close to the worktop.

DIY Workbench. I like the bottom shelf only being half-depth, so you can stand close to the worktop.

Geodesic dome connector. I have only built one dome, and that was back in the youth of my carpentry career. There were three of us building it, which was a number that worked well with the project. We prefabricated all of the panels, and then assembled it. It was large, with a 20' radius. I appreciated all of the geometry, amd trigonometry that I had studied. It was fasciating as it came together and quite beautiful. McC

Geodesic dome connector. I have only built one dome, and that was back in the youth of my carpentry career. There were three of us building it, which was a number that worked well with the project. We prefabricated all of the panels, and then assembled it. It was large, with a 20' radius. I appreciated all of the geometry, amd trigonometry that I had studied. It was fasciating as it came together and quite beautiful. McC

Farmhouse table leg and frame example. No link

Farmhouse table leg and frame example. No link

1001 DO-IT-YOURSELF HINTS AND TIPS: Tricks, Shortcuts, How-tos, and Other Great Ideas for Inside, Outside, and All Around Your House

1001 DO-IT-YOURSELF HINTS AND TIPS: Tricks, Shortcuts, How-tos, and Other Great Ideas for Inside, Outside, and All Around Your House

build a bench Easy...I like easy. I ended up using 2X4's for the legs and a 6x12 stair riser for the bench top but it worked out very well.

build a bench Easy...I like easy. I ended up using 2X4's for the legs and a 6x12 stair riser for the bench top but it worked out very well.

Poitrine de couverture, table basse, coffre à jouets récupérés cèdre rustique, hope chest - teinture de noix de pécan

Poitrine de couverture, table basse, coffre à jouets récupérés cèdre rustique, hope chest - teinture de noix de pécan

Here's the dining booth/fold down bed/storage area. You can see that I tried to tie it together. The bench frame screws three of the four walls together. I was happy with the way the corner joints turned out

Here's the dining booth/fold down bed/storage area. You can see that I tried to tie it together. The bench frame screws three of the four walls together. I was happy with the way the corner joints turned out

Pinterest
Rechercher